Name: RAPTOR P-5800 Combo Leg Extension/Leg Curl
Brand: PROMAXIMA
SKU: P-5800
Price: 3995 USD
Availability: InStock

Product Description
Warranty Info

Description

GENERAL RAPTOR SPECS

Adjustable positions on all machines to accommodate all users to ensure correct bio-mechanical function. Adjustments are made with Heavy Duty spring loaded colored pull-pin knobs.
Weight Stacks are adjusted with a tethered, magnetic selector pin that extends through the entire weight stack.
Cable system with 1/4″ thick 4800lb test military spec galvanized oil impregnated air craft cable finished with a tough nylon coating to 3/16″ thick.
Manual tension adjusters on every machine for the cable adjustments.
Weight stack plates are solid steel machined precisely to with in an oz of weight.
Weight stack is accessible from a seated position.
Weight stacks are enclosed in full length shrouds.
Weight system allows user to increase by 5lb increments.
Instructional guide charts used to inform correct usage for each machine along with anatomical highlights to show which muscle groups are being worked.
Each machine is made with a lower starting weight stack and has counter-balanced arms when needed.
Heavy-duty 40 oz. commercial grade marine Naugahyde upholstery which is 85% mildew resistant. High density closed cell foam reinforced by thick plywood backing for stable support.
Exceeds all ASTM requirements.
Guide rods are 1″ CCRO ANSI 1045, solid steel hard chrome-plated with tensile strength of 75,000psi.
Frames are constructed of High Stress 3/16″ ASTM A-500 grade B structural steel tubing (11 gauge) 2″x4″, 2″x3″ tubing. 2″x3″ tubing on all uprights, 2″x2″x1/8″ ASTM A-500 grade B structural carbon steel tubing (11 gauge) is used on cross members and benches.
All welds are ground down and stress tested.
Custom color powder coat paint, 3 stage pre-paint preparatory process that includes a state of the art pellet blasting machine system that purifies steel. The steel is then sent through a preheat stage before the final magnetic paint powder is applied and baked for a long lasting hardened finish.
Urethane foam grades are a minimal grading of HR-125 (density pcf of 2.60 +/- 0,10 and above in high-compression areas) and HR-150 (density pcf of 4.60 +/- 0.30).
Cams are computer designed and laser cut to exact shape to allow proper variable resistance throughout the exercise complete range of motion. All cams are 1/4″ thick solid steel. The cams are different for each machine to provide correct movement for the exercise.
Shrouded pulley housing is 6″x1/4″ thick solid steel.
Pulley wheels are 4″ and 6″ solid fiberglass reinforced body with a 1/2″ cable groove. Oil dipped double sealed racer ball bearings with a 1/2″ axis shaft hole. Sealed for moisture and dust proof.

Technical Specs

2″ x 4″ 11 guage steel weight stack frame housing.
Form fitted outer weight stack shield.
ABS seat & back protective dishes.
Seamless upholstery.
Custom made grips and ergonomically formed handles.
Foot platform with six adjustments.
Start range limitation with numerical indexing, 1-4
Stop range limitation with alphabetical indexing, A-I.
Red axis of rotation indicator.
Bright red colored pull knobs.
Instructional color placard.
150 lb. weight stack.
1/4″ nylon coated aircraft cable driven. 4800 lb. test.
Counter balanced drive arm.
All pivoting axis have radial bearings.
True strength curve on cam.

PMX ProMaxima Warranty Disclaimer: This warranty disclaimer (“Disclaimer”) is provided by PMX ProMaxima and applies to all products or services sold or provided by the Company, beyond what is expressly stated in any written warranty or guarantee accompanying the product or service. No Additional Warranties: Except as expressly stated in any written warranty or guarantee provided by the Company with the product or service, the Company disclaims all other warranties, whether express, implied, statutory, or otherwise, including but not limited to the implied warranties of merchantability, fitness for a particular purpose, and non-infringement. Limitation of Liability: In no event shall the Company be liable for any indirect, consequential, special, incidental, or punitive damages, whether arising in contract, tort (including negligence), or otherwise, even if the Company has been advised of the possibility of such damages. Exclusions: This Disclaimer extends to, but is not limited to, damages for loss of profits, revenue, data, use, or other intangible losses, whether or not foreseeable, and regardless of whether the Company has been advised of the possibility of such damages. User Responsibility: It is the responsibility of the user or customer to ensure the proper use, installation, and maintenance of the product or service. The Company shall not be held liable for any damage or malfunction caused by improper use, installation, or maintenance. Modification or Discontinuation: The Company reserves the right to modify, suspend, or discontinue any product or service, or the terms of this Disclaimer, at any time without prior notice. Governing Law: This Disclaimer shall be governed by and construed in accordance with the laws of the State of Texas, without regard to its conflicts of law principles. By using or purchasing any product or service from the Company, you acknowledge and agree to be bound by the terms of this Disclaimer. If you do not agree with these terms, your sole remedy is to return the product in accordance with the Company’s return policy or cease using the service. THIS WARRANTY IS NON-TRANSFERABLE. It applies only to the original purchaser of the product and/or service, and any attempt to transfer this warranty to another party will render it void. Subsequent owners are not covered by this warranty. **ADDITIONAL Warranty Disclaimer for Used or “As-Is” Equipment** This equipment is sold “as-is” without any warranty, express or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. The entire risk as to the quality and performance of the equipment is with the buyer. The seller makes no representations or warranties about the condition, functionality, or performance of the equipment. It is the buyer’s responsibility to thoroughly inspect the equipment before purchase and satisfy themselves as to its condition. The seller disclaims any and all warranties regarding the equipment, whether written or oral, including any warranty of title or non-infringement. No advice or information, whether oral or written, obtained by the buyer from the seller shall create any warranty not expressly stated in this disclaimer. In no event shall the seller be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services, loss of use, data, or profits, or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this equipment, even if advised of the possibility of such damage. This warranty disclaimer applies to the fullest extent permitted by law. If any provision of this disclaimer is found to be unenforceable, the remaining provisions will continue to be valid and enforceable. By purchasing the equipment, the buyer acknowledges that they have read, understood, and agreed to this warranty disclaimer. WARRANTY SUBJECT TO UPDATE – PLEASE REFER BACK AT TIME OF PURCHASE FOR CURRENT WARRANTY https://pmxstrength.com/warranty/